t

　　Telephone: 　　　　　　　　　　　Email:

　　Education Experience

　　September 1989 - July 1993

　　Department of Electrical Engineering, Shenyang Institute of Aeronautics

　　* Majored in Radio Engineering

　　* Won a third-class Award in the Contest of Technological Facture & Experimental Skills in Electronics and Electrician, for Students from the Colleges affiliated to the Ministry of Aeronautics & Astronautics

　　*Masterful in analog circuit, power circuit, switching power circuit, operation and amplification; proficient in solving problems related to analog circuit.

　　* Bachelor of Engineering Degree obtained in July 1993

　　September 1993 - July 1996

　　Nanjing University of Aeronautics & Astronautics

　　* Majored in Communication & Electrical System

　　* Main field of research was contemporary communication circuit, especially on high efficiency, high frequency power amplifier (Class E and Class S).

　　*Instructed undergraduate students in their research on wide band frequency multiplier

　　* My diploma thesis was The Electromagnetic Compatibility Testing System of an Airplane

　　* Read extensively on electromagnetic compatibility and its testing, obtained a through knowledge on the test of electromagnetic compatibility, and on the solutions (methods and instrument) to the issues of electromagnetic compatibility. Familiar with the testing standards, especially the GJB and the MTL-STD

　　* Master of Engineering Degree obtained in July 1996

　　Work Experience

　　January 1994 - December 1995

　　* Chairted the research and development work in the Nanjing Leader Electronics Company

　　* Independently developed 3 types of charging devices and management systems for telephones, LDJF-I, LDJF-II and LDJF-1, and their volume of sales exceeded a total of 5,000.

　　* Became the Copartner and Chief Engineer of the company at the end of 1995

　　January 1996 - August 1999

　　Chief Engineer, Nanjing Leader Electronics Company

　　* Hosted the refinement of HTD-80 Program Controlled Telephone Exchanger by adding an E & M trunk.

　　*Primary designer of the HTD-120 Program Controlled Telephone Exchanger

　　* Perfection of the SSC-2 Telecontrol System, which obtained the commercial approval from the Ministry of Electrical Power Resource

　　*Took charge of the quality control and production of the company

　　*Perfection of the FFT Algorithm Program for alternative current sampling in the SSC-2 System, which was used to measure harmonic wave

　　* In the research and development processes, read extensively on production reliability and solved many problems related to production reliability and electromagnet compatibility

　　* Designed the management board by using an Intel 80C188EB processor, studied the TC 2.0 Compiler and rewrote its startup code, and developed a locator and a simple debugging tool

　　* Lead the development of the Supervision System for Petroleum Tanks, based on the SSC-2 System, for the Yangtze Petroleum Chemical Works

　　* Chaired the development of the Data Collection Device for Electrical Power Charging System, which was not finished before my departure from the company

　　* Retrieved a lot of literatures on field bus and real time operating systems, including CAN, Hart, Lonworks, ProfiBus, FF, Arcnet, Ethernet

　　October 1999 - March 2000

　　* Technological Center for Operation & Maintenance, the Beijing Telecommunication Administration

　　* Tracing and research on Internet media technology

　　* Developed a dial box

　　March 2000 - October 2000

　　Beijing OrientTech Network & Telecommunication Technology Ltd. Co.

　　* Project Manager of the Automatic Call Distribution in a Call Center, and the Manager of the Hardware Department simultaneously

　　* As the Head of the Research & Development Division, took charge of four projects, including ADSL (Asymmetric Digital Subscriber Line) Modem (PCI, USB); ADSL Router; DSLAM with 16 ADSL ports and one 100 M Ethernet Port; migration of the RouteWare Protocol Stack

　　Skills & Capability

　　* Masterful in electronic circuit; MCS 51, MCS 96, X86 series; ADSL, MSDSL, HDSL, E 1; industrial supervision and control; program controlled telephone exchanger and TCP/IP

　　* A thorough knowledge on MPC 8XX, MPC 82XX and field bus

　　* As far as software ability is concerned, I am good at assembler of MCS 51, X86; PL/M-51, PL/M-96, PL/M-86; Turbo C, and visual C++

　　Position Desired

　　* Department manager

　　* Project manager

　　* Research & development engineer

　　* Advanced field engineer

　　拓展阅读：面试技巧

　　一、面试自我介绍的时间

　　一般情况下，自我介绍应该是三～五分钟较适宜。时间分配上，可根据情况灵活掌握。一般地，第一部分可以用约二分钟，第二部分可以用约一分钟，第三部分用1～二分钟。

　　好的时间分配能突出重点，让人印象深刻，而这就取决于你面试准备工作做得好坏了。如果你事先分析了自我介绍的主要内容，并分配了所需时间，抓住这三、五分钟，你就能中肯、得体地表达出你自己。有些应试者不了解自我介绍的重要性，只是简短地介绍一下自己的姓名、身份，其后补充一些有关自己的学历、工作经历等情况，大约半分钟左右就结束了自我介绍，然后望着考官，等待下面的提问。但也有的应试者想把面试的全部内容都压缩在这几分钟里。要知道面试考官会在下面的面试中间向你提有关问题的，你应该给自己也给他人留下这个机会。

　　二、面试自我介绍的重要性

　　通过自我介绍，主动地向面试考官推荐自己，这是面试组成结构的重要内容，同时也是面试测评的重要指标。